The Melt Station makes it possible to accurately determine the melting temperature of solid substances.
Connect the Melt Station to a Vernier interface to measure the melting temperature of solid substances.
- Accurate results using built-in RTD over a range of 30°C to 260°C
- High-quality 6X viewing lens for clear observation of the samples
- Innovative, adjustable tilt allows for optimal viewing angle
- Cooling fan reduces time between tests
Each Melt Station comes with 100 standard capillary tubes. Additional packages of 100 are available.
WARNING: This product can expose you to chemicals, including nickel, which are known to the State of California to cause cancer. For more information, see www.P65Warnings.ca.gov
Dimensions:Base: 13 cm x 15 cm x 1.5 cm
Body: 9 cm x 9 cm x 24 cm
Weight: 1.0 kg (2.2 lbs)
Accuracy: ± 0.31 + 0.0006T, where T is the temperature in Celsius
Safety shut down: The heating block is automatically powered down after approximately sixty minutes of heating.
Capillary tubes: 1.4–1.8 mm outside diameter, 100 mm length
Capillary tube slots: 3
Viewing Lens: 27 mm diameter (functional), 30 mm (actual)
Lighting of capillary slots: 3 white LEDs
Lighting of Control Dial:Red LED (indicates heating mode)
Blue LED (indicates cooling mode with cooling fan running)
Yellow LED (safety shut off activated)
Vernier Melt Station
100 standard capillary tubes
Melt Station Capillary Tubes (MLT-TUBE)
Replacement Melt Station Power Supply (MLT-PS)
User Manual: https://www.vernier.com/manuals/mlt-bta/
Warranty: 5-year limited warranty (consumables excluded)